The Elinchrom OCF Adapter is designed to hold up to 1kg (2.2lbs). The Elinchrom-Profoto Adapter (EL26333) should be used for all payloads exceeding that limit.
Yes, we already have OCF Barndors and OCF Wide Reflector 16cm 90°, and more is coming.
Yes, you need the Elinchrom OCF adapter included in the Kit for the ONE and the Profoto adapter included in the Kit for the THREE.
It actually depends on the size of your Beauty Dish.
The use of a Deflector and a Grid is only possible on the 70cm Beauty Dish and not on a 44cm.
We use the same Elinchrom mount since 1974, which means old units are still compatible with actual accessories.
For portraits, we would suggest using the Softlite White Reflector, as the Softlite Silver Reflector might be too crispy for portrait shoots.
The Soflite Beauty Dish 44 cm will cover about 180 cm with a light loss of approximately 4/10th F-Stop from center to edge at 2 or 3 m distance to the background.
Enable auto-refresh for a few seconds and then disable it.
The Transceiver RX (incl. Digital RX, Style RX, and Ranger RX) is not officially supported with the Elinchrom Software/App but can work.
The Transceiver RX is needed to make these units work into the system. The Standby and friendly name function cannot work; however, power and triggering should be possible.
Please note we cannot guarantee this setup will work smoothly without issues.
The Standby and friendly name function cannot work; however, power and triggering should be possible.
Battery run time is about 6 to 8 hours, but the Bridge can also be used with the USB micro cable connected to your computer for charging. You can chose if you use the USB cable or the Bluetooth connection.
If the unit hasn’t been used for a while it’s possible that it accumulated a bit of dust. Before using it, we recommend leaving the unit ON with the modeling lamp for half a day. This will allow the capacitors to reform themselves.